[Healeys] Smiths Speedometer Question

[Don Hardie]

Or elongate the hole in the case.

Don Hardie
BN1
OZ

Date: Sat, 14 Mar 2015 10:29:12 -0400
From: healeymk3 at hotmail.com
To: gturl at sympatico.ca; healeys at autox.team.net
Subject: Re: [Healeys] Smiths Speedometer Question







Although you can pull the speedo apart with the trip lever on and the face attached, the correct way is to carefully remove the needle and the face. You must do this to put the speedo back together. 





Laurie





Sent from my BlackBerry 10 smartphone on the Fido network.





From: gturl at sympatico.ca
Sent: Friday, March 13, 2015 10:48 AM
To: healeys at autox.team.net
Subject: [Healeys] Smiths Speedometer Question











I am trying to put my Smiths Speedometer (4" diameter, out of our BJ8) mechanism back into its case. The problem appears to be the trip odometer rest rod. It will not "push in" far enough to let the mechanism fit down into the case. I am starting
 to wonder if my reset rod is non-original, and too long. It measures 80 mm in length. Can anyone confirm what the length should be? Thanks in advance..

 

Geoff  






_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeymk3@hotmail.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/healeynut2@hotmail.com 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20150315/b1b98368/attachment.html>