[Healeys] FW: Tri Carb Question

[Wilko2]

Here's a set of tri-carb manifolds bored out to 1.75" along with the wider balance pipe. Works style stainless steel headers.

Rick

On Dec 1, 2015, at 1:49 PM, Simon Lachlan wrote:

> 
> 2)      I bored(?) out the 3 inlet manifolds from 1.5” to 1.75”. Have to be careful as that’s as far as you can go. Flap wheels and a good gauge...patience and no rushing.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20151201/a00d55b2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: triple_manifolds_175.jpg
Type: image/jpg
Size: 79424 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/healeys/attachments/20151201/a00d55b2/attachment.jpg>