[Healeys] Oil Pressure Guage

[JOHN BAHE SR]

I am in the process of replacing my safety gauge on my BJ8 after it was
rebuilt due to a sticking oil pressure needle:  Is it necessary to use some
sort of thread sealant on the fastener that holds the capillary tube in
place??  Any advice would be appreciated.

Thanks,
John


On Fri, Feb 21, 2014 at 6:31 AM, R Phillips <healeydriver1 at gmail.com> wrote:

> My Smith's oil pressure gauge on my BJ8 will stick well below it's actual
> reading especially when cold.  A few taps on the glass will bring it up to
> correct reading but may or may not stick on the way down as it heats up.
> Any solutions or just live with it?
>
> Thanks,
>
> Ric
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/johnbahesr@gmail.com
>
>


-- 
John A Bahe Sr.
Cell:  (502) 599-2696
johnbahesr at gmail.com