[Healeys] BN2 Scuttle-Door Seal
Bob Spidell
bspidell at comcast.net
Mon Dec 29 14:05:39 MST 2014
Thanks, Michael. I believe the seals are different on BN2s than on BN1s; did you install the 'BN2 style?'
On 12/29/2014 10:16 AM, Michael Oritt wrote:
> Bob--
>
> I installed these on my BN1 but since I am not sure I did so in keeping with what was original I doubt photos will do
> you any good.
>
> FWIW I did this to remedy a persistent water leak onto my thigh when driving in the rain. The modification did
> succeed in moving the leak onto my calf.
>
> Best--Michael Oritt
>
> On Mon, Dec 29, 2014 at 12:45 PM, Bob Spidell <bspidell at comcast.net <mailto:bspidell at comcast.net>> wrote:
>
> BN2s have a rather elaborate seal contraption along the outside edges of the scuttle and the top front part of the
> doors (the seal is held by a hook-shaped strip of metal and some quarter-round pieces which are screwed to the
> inner part of the door hinge part). Does anyone have a good set of photos of these?
>
> The Moss parts come with good instructions, but it seems both screws and pop rivets are used; I need to know which
> goes where.
>
> TIA,
> Bob
>
> --------------------------------
> Bob Spidell - San Jose, CA
>
>
>
>
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell at comcast.net
*******************************************************************
More information about the Healeys
mailing list