[Healeys] BN2 Scuttle-Door Seal
Michael Oritt
michael.oritt at gmail.com
Mon Dec 29 14:08:59 MST 2014
Yes, the dogleg type as on a BN2. I guess if I am not wearing long pants I
could say there was an improvement.
Best--Michael
On Mon, Dec 29, 2014 at 4:05 PM, Bob Spidell <bspidell at comcast.net> wrote:
> Thanks, Michael. I believe the seals are different on BN2s than on BN1s;
> did you install the 'BN2 style?'
>
>
> On 12/29/2014 10:16 AM, Michael Oritt wrote:
>
>> Bob--
>>
>> I installed these on my BN1 but since I am not sure I did so in keeping
>> with what was original I doubt photos will do you any good.
>>
>> FWIW I did this to remedy a persistent water leak onto my thigh when
>> driving in the rain. The modification did succeed in moving the leak onto
>> my calf.
>>
>> Best--Michael Oritt
>>
>> On Mon, Dec 29, 2014 at 12:45 PM, Bob Spidell <bspidell at comcast.net
>> <mailto:bspidell at comcast.net>> wrote:
>>
>> BN2s have a rather elaborate seal contraption along the outside edges
>> of the scuttle and the top front part of the
>> doors (the seal is held by a hook-shaped strip of metal and some
>> quarter-round pieces which are screwed to the
>> inner part of the door hinge part). Does anyone have a good set of
>> photos of these?
>>
>> The Moss parts come with good instructions, but it seems both screws
>> and pop rivets are used; I need to know which
>> goes where.
>>
>> TIA,
>> Bob
>>
>> --------------------------------
>> Bob Spidell - San Jose, CA
>>
>>
>>
>>
>>
>>
>>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell at comcast.net
>
> *******************************************************************
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/healeys/attachments/20141229/1a4d0f80/attachment.html>
More information about the Healeys
mailing list