[Healeys] BN1 Cylinder Head issues

[Derek Job]

Any normal grease gun should work fine.

Derek
On 10 Dec 2013, at 10:59, STEPHEN CUSS <stephen.j.cuss at btinternet.com> wrote:

> Can anybody please tell me how they overcome the lack of an oil gun to
service
> the nipples on the various points, as I do not have the original Tecalmit
tool
> I a based in the UK, also has anybody with a BN1 come across the issue of
the
> oil feed nozzle in the cylinder head being reduced by using solder , and if
so
> why? I have just had the original head refitted with hardened values and
seats
> for unleaded petrol. On inspection the original nozzle has had the outlet
> restricted to about 30% of original hole diameter.Thanks in advance for any
> help with these issues.
>
> Stephen
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/derek.c.job@gmail.com