[Healeys] BN1 Cylinder Head issues

Alan Seigrist healey.nut at gmail.com
Tue Dec 10 05:29:48 MST 2013


that should be a clean hole.


On Tue, Dec 10, 2013 at 6:59 PM, STEPHEN CUSS <stephen.j.cuss at btinternet.com
> wrote:

> Can anybody please tell me how they overcome the lack of an oil gun to
> service
> the nipples on the various points, as I do not have the original Tecalmit
> tool
> I a based in the UK, also has anybody with a BN1 come across the issue of
> the
> oil feed nozzle in the cylinder head being reduced by using solder , and
> if so
> why? I have just had the original head refitted with hardened values and
> seats
> for unleaded petrol. On inspection the original nozzle has had the outlet
> restricted to about 30% of original hole diameter.Thanks in advance for any
> help with these issues.
>
> Stephen
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


More information about the Healeys mailing list