[Healeys] Transmission/overdrive questions

Chris Masucci csooch1 at aol.com
Thu Aug 9 18:14:04 MDT 2012


I use Yamabond (Yamaha) gray on metal to metal seals, FWIW.

Chris
Sent from my iPhone

On Aug 9, 2012, at 7:38 PM, "Williams, Allen" <awill at ccs.ua.edu> wrote:

> I have taken trans/OD out of my car to freshen it up and stop the oil leaks.
I
> don't think it's ever been apart in 49 years, so I guess it's about time!
It
> worked fine, but is a "leaker" at the adapter plate, rear case and flange
> seal. The OD is completely apart. I intend to clean up the components and
> replace the o-rings while in there, maybe some bearings and bushings, too.
The
> clutch and brake ring look good. One of the leaks I had is at the brake
ring
> joints between the main and rear casing. It appears there is no gasket on
> either side of it but has remnants of some type of sealing compound on it.
So,
> my question is what are people using to successfully seal this joint? In
the
> event I decide to replace the cone clutch, who in the US is selling those
> things? Nothing in Moss or Autofarm.
> One other question while I'm at it, how much side to side play is
acceptable
> in the input (first motion) shaft?
> Thanks in advance for your comments.
> Allen Williams
> 63 BJ7
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/csooch1@aol.com


More information about the Healeys mailing list