[Healeys] Jule Frame

[Oudesluys]

Why not ask the man himself what is involved/needed. He should know 
best. He also seems to be a genuine fellow who will assist if needed/asked.
Kees Oudesluijs
NL


Op 29-10-2011 13:44, Rick Swain schreef:
> Thanks for your replies about the Jule frame. Once again people have had good
> things to say about the performance of the frame. Again, the replies have been
> from people who have had Martin do the work of welding the bulkheads, inner
> fenders, etc. from their cars to the new frame. What I'm looking for is
> feedback from people who have done that work themselves. How difficult was it
> to cut off these components from the old frames and fit them to the new?
> Surely, of the over 500 frames that Martin has sold, some people have tackled
> that work themselves. That's who we'd like to hear from.
> When we put a new Kilmartin frame under my car, the transfer of the old
> components was straightforward. Where Martin's frame differs somewhat from the
> originals, we're wondering if this presents any problems in moving stuff from
> the old to the new.
> Thanks
> Rick
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
>
>
> -----
> Geen virus gevonden in dit bericht.
> Gecontroleerd door AVG - www.avg.com
> Versie: 2012.0.1834 / Virusdatabase: 2092/4581 - datum van uitgifte: 10/28/11