[Healeys] Drive shaft bolts

[David Nock]

The nuts and bolts are for the rear flange, The D headed bolts are  
for the transmission flange



David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Oct 10, 2011, at 1:56 PM, john spaur wrote:

> I have two different bolt sets for the drive shaft. One set is  
> standard hex head. The other set is 1" long with a "T" style head  
> meaning that it is flat on one side and it meant to set against the  
> flat of the drive shaft u-joint to keep it from turning when  
> tightened (it will not accept any type of wrench).
>
> Which end of the drive shaft is this bolt for; the OD end or the  
> differential end?
>
> Thank you,
> John Spaur
> '62 MK II
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net