[Healeys] Drive shaft bolts

[Peter Schauss]

The "T" style bolts go on the overdrive end of the drive shaft.

Peter Schauss
1963 BJ7
1980 MGB

> -----Original Message-----
> From: healeys-bounces at autox.team.net [mailto:healeys-
> bounces at autox.team.net] On Behalf Of john spaur
> Sent: Monday, October 10, 2011 4:56 PM
> To: healeys at autox.team.net
> Subject: [Healeys] Drive shaft bolts
> 
> I have two different bolt sets for the drive shaft. One set is
> standard hex head. The other set is 1" long with a "T" style head
> meaning that it is flat on one side and it meant to set against the
> flat of the drive shaft u-joint to keep it from turning when
> tightened (it will not accept any type of wrench).
> 
> Which end of the drive shaft is this bolt for; the OD end or the
> differential end?
> 
> Thank you,
> John Spaur
> '62 MK II
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/rpschauss@gmail.com