[Healeys] Drive shaft bolts

Bob Spidell bspidell at comcast.net
Mon Oct 10 17:21:58 MDT 2011


The O/D end. There's a flat spot on the O/D casing which allows these to be used (you have to rotate the driveshaft 90deg to insert each bolt); a regular hex-head bolt will not go in here. 

Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message -----
From: "john spaur" <jmsdarch at sbcglobal.net> 
To: healeys at autox.team.net 
Sent: Monday, October 10, 2011 1:56:11 PM 
Subject: [Healeys] Drive shaft bolts 

I have two different bolt sets for the drive shaft. One set is 
standard hex head. The other set is 1" long with a "T" style head 
meaning that it is flat on one side and it meant to set against the 
flat of the drive shaft u-joint to keep it from turning when 
tightened (it will not accept any type of wrench). 

Which end of the drive shaft is this bolt for; the OD end or the 
differential end? 

Thank you, 
John Spaur 
'62 MK II 
_______________________________________________ 


More information about the Healeys mailing list