[Healeys] Exact position of 'Staple' for spare wheel retaining strap

[Derek Job]

Sorry - Its a 100-Six BN4

Derek

On Mon, Jun 13, 2011 at 7:58 PM, Josi Vicente Vargas
<jvvmusme at yahoo.com>wrote:

>   What car ??
>
> Josi Vicente Vargas
> Musmi
>
> Tel. (571) 321 3740
> Cel. (57) 311 288 3401
> Skype: jovivago
>
>
> www.musme.net
>
>
> Bogota, Colombia
>
>
>  ------------------------------
> *From:* Derek Job <derek.c.job at gmail.com>
> *To:* Forum <Healeys at autox.team.net>
> *Sent:* Mon, June 13, 2011 10:51:10 AM
> *Subject:* [Healeys] Exact position of 'Staple' for spare wheel retaining
> strap
>
> All
>
> Following restoration, my car no longer has  the two holes for the screws
> which secure the 'staple' through which the spare wheel leather strap
> passes.
>
> Can anyone give me an accurate measurement of exactly where these holes are
> positioned in the boot.? Is this staple normally attached with small bolts
> or with self tapping screws?
>
> Also, the bracket  to which the spare wheel retaining rod connects, has two
> holes in it but all the spare parts manuals show only the one long bolt
> passing through it. What is the other hole for? Is there an additional
> screw
> required to give it more support when attached to the wooden block?
>
> Thanks
>
> Derek
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com