[Healeys] Exact position of 'Staple' for spare wheel retaining strap

[José Vicente Vargas]

What car ??
 Josi Vicente Vargas
Musmi


Tel. (571) 321 3740
Cel. (57) 311 288
3401
Skype: jovivago


www.musme.net


Bogota, Colombia
________________________________
From: Derek Job <derek.c.job at gmail.com>
To:
Forum <Healeys at autox.team.net>
Sent: Mon, June 13, 2011 10:51:10 AM
Subject:
[Healeys] Exact position of 'Staple' for spare wheel retaining strap

All
Following restoration, my car no longer has  the two holes for the screws
which secure the 'staple' through which the spare wheel leather strap
passes.
Can anyone give me an accurate measurement of exactly where these holes are
positioned in the boot.? Is this staple normally attached with small bolts
or
with self tapping screws?

Also, the bracket  to which the spare wheel
retaining rod connects, has two
holes in it but all the spare parts manuals
show only the one long bolt
passing through it. What is the other hole for? Is
there an additional screw
required to give it more support when attached to
the wooden block?

Thanks

Derek
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/jvvmusme@yahoo.com