[Healeys] K and N filters to HD8 carbs

[Magnus Karlsson]

You can actually drill a hole only in the backing plate and route the hose
through. On the other side you insert a loose piece of pipe into the hose,
which will keep the hose in place.

Magnus Karlsson

Bores Motor Corporation AB
Husbondegatan 36B
507 60 Bores
Phone +46-703-933349
www.concourshealeys.com





14 mar 2010 kl. 21.55 skrev john gillespie:

> Hello Bob and others,  two of us in the NE region that owned BJ8's  had K
and
> N filters installed.  We had a hole drilled and then a small pipe welded
onto
> the backing plate.  This pipe did clear the dashpots and we were able to
> connect the breather hose.  The plates that we had were made out of
aluminum
> so you have to get a welder that knows how to handle that type of material.
> John