[Healeys] Fw: AW: 100 with DW aluminum sump-

Rich C richchrysler at quickclic.net
Sun Mar 14 14:52:34 MST 2010


--------------------------------------------------
From: "Rich C" <richchrysler at quickclic.net>

 Thomas, et al,

 I just took two measurements on a stock Hundred engine and have found the
 following:

 - total depth of stock undamaged oil pan 5 3/16" or 13.3 CM
 - length from bottom of oil sump to top of dipstick tube 13 3/4" or 35 CM

 Hope this helps,
 Rich Chrysler
 --------------------------------------------------
> From: "T+ B Willig" <willig at wtnet.de>
>
>> Rich,
>>
>> the sump for the hundred came exactly with the same instructions. In view 
>> of
>> this I am afraid to fill the same amount of oil as used for the steel 
>> sump
>> into the alu sump.
>>
>> The question is, what is the actual oil level in the steel sump in
>> comparison to the bottom of the block?
>>
>> Maybe someone with a steel sump could measure the distance from the 
>> bottom
>> of the sump to the end of the dipstick tube?
>>
>> Regards
>>
>>
>> Thomas


More information about the Healeys mailing list