[Healeys] K and N filters to HD8 carbs

[Oudesluys]

K&N have plastic connectors made for the purpose that fit into a drilled 
hole in the back or front plate. Available as an accessoire.
Kees Oudesluijs
NL



john gillespie schreef:
> Hello Bob and others,  two of us in the NE region that owned BJ8's  had K and
> N filters installed.  We had a hole drilled and then a small pipe welded onto
> the backing plate.  This pipe did clear the dashpots and we were able to
> connect the breather hose.  The plates that we had were made out of aluminum
> so you have to get a welder that knows how to handle that type of material. 
> John
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl
> ------------------------------------------------------------------------
>
>
> Geen virus gevonden in het binnenkomende-bericht.
> Gecontroleerd door AVG - www.avg.com 
> Versie: 9.0.790 / Virusdatabase: 271.1.1/2746 - datum van uitgifte: 03/14/10 08:33:00