[Healeys] BJ8 Wiring

[Bob Brown]

Connector on the left side of firewall had a loose wire. Knew the problem
woulld be at that conenctor based on the lights out and those still on.
Just
wasn't sure where to look for the connector.

Thanks
Bob
________________________________
From: BOB BENISEK <rbeni3000 at wowway.com>
To:
Bob Brown <blkbt7 at yahoo.com>
Cc: Healey List <healeys at autox.team.net>
Sent:
Sat, June 12, 2010 5:40:33 PM
Subject: Re: [Healeys] BJ8 Wiring


Cheeck the
connector at the left side of the firewall. There should be a double connector
with four red wires.

----- Original Message -----
From: "Bob Brown"
<blkbt7 at yahoo.com>
To: "Healey List" <healeys at autox.team.net>
Sent: Saturday,
June 12, 2010 1:40:32 PM
Subject: [Healeys] BJ8 Wiring

My BJ8 has no rear
"driving lights" or license plate light. 
I have stop
lights and turn
indicators (indicators appear to be a seperate circuit).

I
have no continuity
at tne connector (red wire) in the boot. To me this tehn
tells me the problem
is farther forward. 
Where is the next connector for the
red wire?  My diagram
has this connector spliting off to the switch and to the
front "pilot" lights
which are working. 

Thus the problem could be at this
connector. New wiring
harness, bulbs,etc.
TIA,
Bob
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested
annual donation  $12.75
Archive: http://www.team.net/archive
Forums:
http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/rbeni3000@wowway.com