[Healeys] Speedometer Angle Drive

[Bob Spidell]

Hi Peter,

Sort of.  I have two drives (thanks hmj), each with some parts missing 
or broken.  I'm hoping to make one good one out of them.

I've heard of people lubricating these, but I can't for the life of me 
figure out how to do it (unless you just drop oil in from either end).

bs


Peter Caldwell wrote:
> Bob, I used to rebuild these. Find a small socket that fits over the 
> cable and is the diameter of the steel slug that holds the cable bit. 
> Tap it with a hammer and the gear, shims and core plug will all drop 
> out. When you reassemble, you'll dimple the housing to hold the core 
> plug in.
>
> Are you going to repair a broken cable?
>
> Peter  C
> ==
> At 03:32 PM 11/21/2009, Bob Spidell wrote:
>> Anybody taken these apart and reassembled?  Any tech articles and/or 
>> websites on how to accomplish this?  It's not obvious or even 
>> apparent how this can be done, or if it's even possible.
>>
>> TIA,
>> Bob
>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************