[Healeys] 100blown gasket?

[Bob]

As Michael points out PLUS, make sure you have the correct wrenches of 
you will be replacing
all the ones that got rounded off.

Bob

55BN1

 
Michael Salter wrote:

>Kees advice is, I'm sure, born of experience and an absolute must.
>One thing to be aware of, in case you are not, is that all the fasteners in
>the BN1/2 engine are BSF or BSW threads so take particular care of those
>nuts and bolts..they are not available at Home Depot!!!
>
>Michael Salter
>100 (1953) #174
>AHX12 (1953)
>Bugeye (1961)
>http://www.netbug.net/blogmichael/?p=432
>
>
>-----Original Message-----
>From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
>On Behalf Of kaynmike.bham at juno.com
>Sent: February 28, 2009 2:51 PM
>To: healeys at autox.team.net
>Subject: [Healeys] 100blown gasket?
>
>I can't put it off a minute longer. (Sun's coming out) must remove the head
>and look. How much must I remove to get the head off? Just the manifold
>nuts,
>water lines and....? Is there an order to all this? (What? The cabinet maker
>is going to take the head off ? Is he completely crazy?
>Mike Gougeon 56BN2