[Healeys] 100blown gasket?

[Michael Salter]

Kees advice is, I'm sure, born of experience and an absolute must.
One thing to be aware of, in case you are not, is that all the fasteners in
the BN1/2 engine are BSF or BSW threads so take particular care of those
nuts and bolts..they are not available at Home Depot!!!

Michael Salter
100 (1953) #174
AHX12 (1953)
Bugeye (1961)
http://www.netbug.net/blogmichael/?p=432


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of kaynmike.bham at juno.com
Sent: February 28, 2009 2:51 PM
To: healeys at autox.team.net
Subject: [Healeys] 100blown gasket?

I can't put it off a minute longer. (Sun's coming out) must remove the head
and look. How much must I remove to get the head off? Just the manifold
nuts,
water lines and....? Is there an order to all this? (What? The cabinet maker
is going to take the head off ? Is he completely crazy?
Mike Gougeon 56BN2
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as msalter at precisionsportscar.com

http://www.team.net/archive