[Fot] TR3 using TR4A manifold
Steven Belfer
steve at artwithcars.com
Sun Aug 3 19:19:48 MDT 2025
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 933725 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20250803/c3476c85/attachment.jpeg>
-------------- next part --------------
~Steve
> On Aug 3, 2025, at 3:41 PM, Greg Blake via Fot <fot at autox.team.net> wrote:
>
> Howdy folks. Have a street car question for yall. Assembly of Will’s car continues and I was test fitting the carbs and manifold I was planning to use. It’s a TR4A intake paired with HS6s. This is what I use on the TR3 race car. On the street car, the rear float is very close to the heater bulkhead fitting (see pictures). Has anyone done this on a street car and have a good solution to this interference? It looks like we could move the bulkhead fitting over by about 3-4” w/o issue, just hate to put another hole in the firewall.
>
> Appreciate ideas.
> <image0.jpeg>
> <image1.jpeg>
> <image2.jpeg>
>
> Sent from my iPhone_______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/steve@artwithcars.com
>
>
More information about the Fot
mailing list