[Fot] TR3 using TR4A manifold
Jerry Faiella
jerryfaiella at gmail.com
Mon Aug 4 05:10:28 MDT 2025
Greg. My float bowls are to the right of the carb body as you view them from the passenger side of the car. Hope this helps
Jerry Faiella
Sent from my iPad
> On Aug 3, 2025, at 9:41 PM, Steven Belfer via Fot <fot at autox.team.net> wrote:
>
>
> <image0.jpeg>
>
> ~Steve
>
>
>> On Aug 3, 2025, at 3:41 PM, Greg Blake via Fot <fot at autox.team.net> wrote:
>>
>> Howdy folks. Have a street car question for yall. Assembly of Will’s car continues and I was test fitting the carbs and manifold I was planning to use. It’s a TR4A intake paired with HS6s. This is what I use on the TR3 race car. On the street car, the rear float is very close to the heater bulkhead fitting (see pictures). Has anyone done this on a street car and have a good solution to this interference? It looks like we could move the bulkhead fitting over by about 3-4” w/o issue, just hate to put another hole in the firewall.
>>
>> Appreciate ideas.
>> <image0.jpeg>
>> <image1.jpeg>
>> <image2.jpeg>
>>
>> Sent from my iPhone_______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/steve@artwithcars.com
>>
>>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jerryfaiella@gmail.com
>
>
More information about the Fot
mailing list