[Fot] TR-3/4 Distributor Drive Orientation

[Anthony Parker]

Looks offset toward the block.
Confirm with distributor when rotor is pointed to No.1 plug wire location.



________________________________
From: Fot <fot-bounces at autox.team.net> on behalf of Jack Wheeler via Fot <fot at autox.team.net>
Sent: Sunday, November 26, 2023 9:54 AM
To: fot at autox.team.net <fot at autox.team.net>
Subject: [Fot] TR-3/4 Distributor Drive Orientation

I must have done this hundreds of times, but it has been a number of years, and I can't remember.  See the attached picture from the TR-4 Workshop Manual.  It shows the orientation of the distributor drive gear with the #1 piston at TDC in the firing position.  Maybe my eyes are going, but I can't tell from the picture if the slot in the drive gear is offset toward the block, or away from the block.  Please help.

Thanks.

Jack
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231126/285c0224/attachment.htm>