[Fot] TR-3/4 Distributor Drive Orientation

[Jack Wheeler]

I must have done this hundreds of times, but it has been a number of years, and I can't remember.  See the attached picture from the TR-4 Workshop Manual.  It shows the orientation of the distributor drive gear with the #1 piston at TDC in the firing position.  Maybe my eyes are going, but I can't tell from the picture if the slot in the drive gear is offset toward the block, or away from the block.  Please help.
Thanks.
Jack
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231126/d16b6e7b/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: DSC_0012.JPG
Type: image/jpeg
Size: 2569733 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20231126/d16b6e7b/attachment-0001.jpe>