[Fot] TR-3/4 Distributor Drive Orientation
Philip Gott
vfracing at aol.com
Sun Nov 26 11:29:24 MST 2023
The keyway is pointing away from the block. Easier to see than the offset.
Phil
Sent from my iPhone
> On Nov 26, 2023, at 10:35 AM, Anthony Parker via Fot <fot at autox.team.net> wrote:
>
>
> Looks offset toward the block.
> Confirm with distributor when rotor is pointed to No.1 plug wire location.
>
>
>
> From: Fot <fot-bounces at autox.team.net> on behalf of Jack Wheeler via Fot <fot at autox.team.net>
> Sent: Sunday, November 26, 2023 9:54 AM
> To: fot at autox.team.net <fot at autox.team.net>
> Subject: [Fot] TR-3/4 Distributor Drive Orientation
>
> I must have done this hundreds of times, but it has been a number of years, and I can't remember. See the attached picture from the TR-4 Workshop Manual. It shows the orientation of the distributor drive gear with the #1 piston at TDC in the firing position. Maybe my eyes are going, but I can't tell from the picture if the slot in the drive gear is offset toward the block, or away from the block. Please help.
>
> Thanks.
>
> Jack
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20231126/2bfaf3a0/attachment.htm>
More information about the Fot
mailing list