[Fot] Source for beefed up sway bars

[Joe Boruch]

 Rick, I second what Henry said about the #24 cam.  My rev limiter is set at 7300 and it pulls right up to that.  I don't want to push past that, since I have cracked a Moldex crank.  
Since this thread is about sway bars, I have a 1" solid bar that has been on the car for 30+ years.  Replacing it with a hollow bar with Speedway parts has been on my to do list.  JoeB
    On Friday, January 20, 2023 at 11:44:46 PM EST, fmccjr--- via Fot <fot at autox.team.net> wrote:  
 
 This is the car that when one stood on the side nerf bar and jumped with all his mite, moved like a block of Granite?Sheesh, your idea of body roll is a little different than mine, Dave!

On another subject (and because I haven’t figured out how to do a ‘dry’ post), my motor got a bit ‘fried’ at the K Cup in Pittsburgh last summer. In short, I’m seeking advice on a good, high quality camshaft for a TR4 motor. Billet crank, Carillo rods, forged pistons, etc. 
Any suggestions? I’m not an engineer, just a musician, and I don’t need to beat Henry Frye! (Well, not right away…😁)
Thanks, Rick McCurdy



  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20230121/afdeb63a/attachment.htm>