[Fot] Air Filters for Webers

[R. John Lye]

I also have an ITG filter on my fuel injected TR-3 that uses throttle
bodies that mimic Weber DCOE carbs.

John
 



On Mon, 12 Dec 2022 17:52:57 -0800, "TeriAnn J. Wakeman via Fot" <fot at autox.team.net> wrote:
 
On 12/12/22 4:01 PM, Jack Wheeler via Fot wrote:



I am getting ready to install a set of 40 DCOE Webers on my 1600 CC Ford engine in my Morgan.  The Webers came with short (about 1 1/2 inches) velocity stacks.  Does anyone know of a good air filter set-up for these carbs?  I know most of your race cars probably run without filters, but this is a street car, and I would really like to have filters.  Thanks.



I went with a itg foam filter and minimal velocity stacks, basically just the lip to fit the front carb on the TR3. itg has a number of styles.

TeriAnn





 

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rjl6n@cstone.net

 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20221213/f4866e0e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: filter 1.jpg
Type: image/jpeg
Size: 83778 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221213/f4866e0e/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2732.jpg
Type: image/jpeg
Size: 221915 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221213/f4866e0e/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: filter backplate.jpg
Type: image/jpeg
Size: 65758 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221213/f4866e0e/attachment-0002.jpg>