[Fot] Air Filters for Webers

TeriAnn J. Wakeman tjwakeman at gmail.com
Mon Dec 12 18:52:57 MST 2022


On 12/12/22 4:01 PM, Jack Wheeler via Fot wrote:
> I am getting ready to install a set of 40 DCOE Webers on my 1600 CC 
> Ford engine in my Morgan.  The Webers came with short (about 1 1/2 
> inches) velocity stacks.  Does anyone know of a good air filter set-up 
> for these carbs?  I know most of your race cars probably run without 
> filters, but this is a street car, and I would really like to have 
> filters.  Thanks.

I went with a itg foam filter and minimal velocity stacks, basically 
just the lip to fit the front carb on the TR3. itg has a number of styles.

TeriAnn


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20221212/0bbe8464/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: filter 1.jpg
Type: image/jpeg
Size: 83778 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221212/0bbe8464/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2732.jpg
Type: image/jpeg
Size: 221915 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221212/0bbe8464/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: filter backplate.jpg
Type: image/jpeg
Size: 65758 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/fot/attachments/20221212/0bbe8464/attachment-0002.jpg>


More information about the Fot mailing list