[Fot] Intake/Exhaust manifold gasket

[Joe Alexander]

Sean Alexander is using them and has them in stock at a discount.

I am trying to be retired.

Joe Alexander
4505 Donald Dr
Cedar Falls, IA 50613
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711


> On Feb 2, 2021, at 3:07 PM, R. John Lye via Fot <fot at autox.team.net> wrote:
> 
> Thanks for all the good ideas folks.  I think that I am going to try the Remflex
> gaskets.  If they are good enough for Joe Alexander, they should be a good
> product.
> 
> Thanks,
> John
>  
> 
> 
> 
> 
> 
> On Tue, 02 Feb 2021 15:13:38 -0500, "R. John Lye via Fot" <fot at autox.team.net> wrote:
> 
> Hi all,
> 
> I have recently had to install and remove a header several times for my TR-3A,
> and discovered that the Moss Motors "high performance" intake/exhaust manifold
> gasket had disintegrated, despite not having even started the engine yet. So, I am
> looking for suggestions for a better solution.  Any thoughts or suggestions?
> Thanks in advance.
>  
> 
> --
> Thanks,
> John
> 
> rjl6n at cstone.net
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rjl6n@cstone.net
> 
> 
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/joealexandervintage@gmail.com
> 
>