[Fot] Intake/Exhaust manifold gasket

[R. John Lye]

Thanks for all the good ideas folks.  I think that I am going to try the Remflex
gaskets.  If they are good enough for Joe Alexander, they should be a good
product.

Thanks,
John
 





On Tue, 02 Feb 2021 15:13:38 -0500, "R. John Lye via Fot" <fot at autox.team.net> wrote:

Hi all,

I have recently had to install and remove a header several times for my TR-3A,
and discovered that the Moss Motors "high performance" intake/exhaust manifold
gasket had disintegrated, despite not having even started the engine yet. So, I am
looking for suggestions for a better solution.  Any thoughts or suggestions?
Thanks in advance.
 

--
Thanks,
John

rjl6n at cstone.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rjl6n@cstone.net