[Fot] Alternate rear springs for GT6

[John H. Hasty]

Anderson S C

Sent from my iPhone

On Dec 29, 2021, at 11:34 PM, Bob Totten via Fot <fot at autox.team.net> wrote:


Scott,

I purchased a composite spring from " Flex-A-Form " years back for my Spit GT autocrosser.  It is rated at 250 lbs. and has the helped the handling.  Believe they are located in one of the Carolina's ??

Good Luck,
Bob Totten
'64 Spit GT  autocrosser


-----Original Message-----
From: Mark Bradakis via Fot <fot at autox.team.net>
To: fot at autox.team.net
Sent: Wed, Dec 29, 2021 4:51 pm
Subject: Re: [Fot] Alternate rear springs for GT6


On 12/29/21 7:59 AM, Scott Janzen via Fot wrote:
> Has anyone sourced a stiffer rear spring for the GT6, or modified the
> existing?
> I’m not really sure what’s on my car, looks close to stock, but I’d
> like something slightly stiffer.
>
>
I recall Tim Suddard at Grassroots Motorsports had a one piece
fiberglass (?) spring made for the Spitfire project he was working on.
Don't know if that idea ever went anywhere.

mjb.



_______________________________________________
fot at autox.team.net<mailto:fot at autox.team.net>

http://www.fot-racing.com<http://www.fot-racing.com/>

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/robertten1@aol.com


_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jhasty@mhc-law.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20211230/ca60933b/attachment.htm>