[Fot] Correction

[Jack Wheeler]

 I think I just answered one of my own questions.  I don't know why I was thinking one axle shaft was shorter than the other (it's been a long time since I rebuilt one, my race car had IRS).  Anyway, I checked the TR-2/3 the TR-4 & TR-4A parts books and all show just pone part number for both rear axle shafts.  Therefore, contrary to my earlier comment, I guess they were the same length.  I'd still like to know which rear axle this (25") one came from (TR-3 or TR-4).  Thanks.
Jack

   ----- Forwarded Message ----- From: Jack Wheeler via Fot <fot at autox.team.net>To: FOT Triumph <fot at autox.team.net>Sent: Tuesday, April 13, 2021, 11:03:25 AM EDTSubject: [Fot] Help Identifying Parts
 I have 2 items that I need help in identifying and I'm sure some of you have these items laying around and can check them out.  Thanks in advance for your help.
First item is a transmission mainshaft.  The nose of this shaft (where it slides into the roller bearing) measures .875" in diameter.  I think this is a TR-4 mainshaft, but it could be a TR-6.  I think the TR-6 mainshaft nose was slightly smaller in diameter than the TR-4, but I can't remember the diameters of each.  Can someone help me identifies which this is?
Second item is a rear axle shaft.  It measures 25" long.  First, is it from a TR-3 or TR-4 rear axle?  I know that the two axle shafts in a unit were different lengths.  In whichever axle this goes (TR-3 or TR-4) is it the short one or the long one?
Again, many thanks.
Jack
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20210413/079b608d/attachment-0003.htm>