[Fot] Six head gasket?

[van.mulders.marcel at telenet.be]

Geoff, 
Down under? You have the same rights to pretend you are on the top of the earth as any other country. There is no physical law to prove otherwise! 
Marcel 


Van: "fot" <fot at autox.team.net> 
Aan: "Brian Dennis" <britracer89 at yahoo.com> 
Cc: "fot" <fot at autox.team.net> 
Verzonden: Maandag 2 maart 2020 07:31:58 
Onderwerp: Re: [Fot] Six head gasket? 

I run very high compression in both my TR6 and GT6 race cars and have found the Lucas head gaskets are the best 
Geoff Byrne 
TR6 racer down under 

Sent from my iPhone 



On 2 Mar 2020, at 10:30 am, Brian Dennis via Fot <fot at autox.team.net> wrote: 





BQ_BEGIN

Any head gasket suggestions for gt6 12:1 motor. Have had chronic oil leak at pushrod side of head. Had same problem with two different heads before this one as well. With a different block. Current Block is zero deck height and head is cut to achieve the 12:1. 
Just wondering what others might be using for head gasket? 
Thanks, 
Brian 


[ https://overview.mail.yahoo.com/?.src=iOS | Sent from Yahoo Mail for iPhone ] 
_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gkbyrne@optushome.com.au 



BQ_END


_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot 
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200302/2b6b9c18/attachment-0003.htm>