[Fot] Six head gasket?

[Geoff Byrne]

I run very high compression in both my TR6 and GT6 race cars and have found the Lucas head gaskets are the best
Geoff Byrne
TR6 racer down under

Sent from my iPhone

> On 2 Mar 2020, at 10:30 am, Brian Dennis via Fot <fot at autox.team.net> wrote:
> 
>  Any head gasket suggestions for gt6 12:1 motor. Have had chronic oil leak at pushrod side of head. Had same problem with two different heads before this one as well. With a different block.  Current Block is zero deck height and head is cut to achieve the 12:1. 
> Just wondering what others might be using for head gasket?
> Thanks, 
> Brian
> 
> 
> Sent from Yahoo Mail for iPhone
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gkbyrne@optushome.com.au
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200302/f12c1f9d/attachment-0003.htm>