[Fot] TR4 Pressure Plate

[Steve Yott]

Herman's rule was... bent fingers, straight faced bearing.. straight fingers, curved bearing.  After many years fixing clutch issues I learned to believe him.Steve Yott
-------- Original message --------From: Michael Moore <mmoore at mtmcpafirm.com> Date: 6/13/20  1:27 PM  (GMT-06:00) To: fot <fot at autox.team.net> Subject: [Fot] TR4 Pressure Plate 

I need to replace my pressure plate for the race car. I use a stock setup. My throw-out bearing has a rounded face, and the pressure plate in the car has “bent fingers”. The spare that I have is a Sachs with straight fingers.
Can I use the same throw-out bearing.
 
 
Thanks, Mike
 
62 TR4, Race car
63 TR4, Street car
 
Mike & Becky Moore
6050 Ruhl Road, Fairview, PA 16415
814-323-0698
mmoore at mtmcpafirm.com
 
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200613/a77c40c1/attachment.htm>