[Fot] TR4 Pressure Plate

[Phil Gott]

Yes. The fingers need to “roll” on the throwout bearing. Only one surface needs to be rounded.
Phil Gott

Sent from my iPhone

> On Jun 13, 2020, at 6:26 PM, Michael Moore <mmoore at mtmcpafirm.com> wrote:
> 
> 
> I need to replace my pressure plate for the race car. I use a stock setup. My throw-out bearing has a rounded face, and the pressure plate in the car has “bent fingers”. The spare that I have is a Sachs with straight fingers.
> Can I use the same throw-out bearing.
>  
>  
> Thanks, Mike
>  
> 62 TR4, Race car
> 63 TR4, Street car
>  
> Mike & Becky Moore
> 6050 Ruhl Road, Fairview, PA 16415
> 814-323-0698
> mmoore at mtmcpafirm.com
>  
>  
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vfracing@aol.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20200613/957e2b6e/attachment-0003.htm>