[Fot] EGT gauge installation

[Barr, Scott]

When doing mine on #1 and #4, I installed the probes so that they faced toward the outside of the car, so that they would not be so much in the way when I reached around the outside of the header to get at the fasteners for the intake and exhaust manifolds.  Saves taking them off every time you want to just drop the header or pull the intake manifold.

Scott (B.)

From: Fot <fot-bounces at autox.team.net> On Behalf Of John Styduhar via Fot
Sent: Thursday, February 28, 2019 9:19 AM
To: DPPI - Mark Craig <info at dieselperformanceparts.com>; Triumph 'Friends of Triumph <fot at autox.team.net>
Subject: Re: [Fot] EGT gauge installation

The location of the EGT sensors on #1 and #4 puts it on the outside curve of the tubes.   Does it matter where I drill the hole on the bend?  I can approach it from the side or outside of the curve on both.

On Thu, Feb 28, 2019 at 8:46 AM DPPI - Mark Craig <info at dieselperformanceparts.com<mailto:info at dieselperformanceparts.com>> wrote:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20190228/5d2a1f2f/attachment-0001.htm>