[Fot] brake fluid resistant paint

[Robert Lang]

 Hi,
I can't speak for Imron or the Eastwood paint, but I've used catalyzed urethane like Nason 2k and I've been quite happy with it on the race car and I have spilled DOT 4 fluid on it and the paint did not discolor or peel as long as I wiped it right off. I also flush the surface with lots of water out of an abundance of caution. I would say that I'm pleasantly surprised, but also satisfied. So much so, I'm painting under the hood on the restoration I'm doing now with that Nason 2k urethane.
Regards,Bob Lang

    On Tuesday, December 17, 2019, 7:51:50 PM EST, Brian Schirano via Fot <fot at autox.team.net> wrote:  
 
 Hey Friends
Anyone testify to resilience of this Eastwood paint or Imron paint as far as resistance to brake fluid?https://www.eastwood.com/promotions/autobody-specials.html?limit=all

I'm going to clean up my firewall and would like to use something harder than the usual stuff. 
Cheers and Merry ChristmasBrian
Brian Schirano#26 Blue/White GT6

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/robertlangtr6@yahoo.com


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20191218/d2e1a1d4/attachment-0003.htm>