[Fot] Six cylinder camshafts

[Bob Kramer]

Scott,

No advice here but there is an interesting article on the web on this
subject.

http://www.averymotorsports.com/triumph-tr6/tr6-camshaft-selection/



Bob Kramer


On Tue, Nov 13, 2018 at 10:08 AM Scott Janzen via Fot <fot at autox.team.net>
wrote:

> I’m in search of a new camshaft for a second engine that I’m ready to
> assemble.  My current engine runs a cam from Wishbone Classics (spec
> attached) that I am very happy with, but the owner of the company is not
> responding to inquiries, so getting the same cam does not seem to be an
> option.
>
> I run a full race engine, triple webers, ported head, oversize valves,
> carillo rods, wiseco pistons, about 11.5:1 compression, aluminum flywheel,
> rev range 4500-7200+.
>
> Recommendations?
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/fot
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/rkramer56@gmail.com
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20181113/5210995b/attachment-0001.htm>