[Fot] Differential setup

[don at dcphotos.com]

I say go for it, Greg.
What’s the worse that can happen!?!  ;-)
Don


> 
> Message: 1
> Date: Sun, 11 Nov 2018 19:49:07 -0600
> From: Greg Blake <gblake58tr3 at icloud.com>
> To: Fot <fot at autox.team.net>
> Subject: [Fot] Differential setup
> Message-ID: <F2869E89-6232-4B8F-82EE-3CF9966DA40C at icloud.com>
> Content-Type: text/plain; charset="utf-8"
> 
> Attached are pics of the gear mesh patterns on the drive and coast faces of the ring gear on the diff. These are new gears from Bastuck which are the Oerlikon type. I like the drive side pattern but the coast pattern looks a little high. 
> 
> The pinion is set at 0.715? depth and backlash is at 0.004?
> 
> I have moved the pinion 0.020? deeper in the housing at 0.005? increments and the drive side pattern just moved to the tow side. 
> 
> Should I be worried about the coast side or leave it alone?
> 
> Thanks. 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image1.jpeg
> Type: image/jpeg
> Size: 1011723 bytes
> Desc: not available
> URL: <http://autox.team.net/pipermail/fot/attachments/20181111/4ab0b219/attachment-0002.jpeg>
> -------------- next part --------------
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image2.jpeg
> Type: image/jpeg
> Size: 1006754 bytes
> Desc: not available
> URL: <http://autox.team.net/pipermail/fot/attachments/20181111/4ab0b219/attachment-0003.jpeg>
> -------------- next part --------------
> 
> Sent from my iPhone
>