[Fot] clutch master opinion

[Bill Tobin]

Hi Brian, as an old friend told me, and from personal experience, you have about a 50-50 chance of success when rebuilding these. 
For my 2 cents, I'd buy two of the less expensive ones, put one on the car and the other for spare. Or buy the more expensive one to put on the car and the cheaper one for spare.
You might want to replace the slave too while you're at it.
Also from my experience, trying to save a few bucks and go the cheaper route usually bites you in the butt. 
Also on my TR6, there was kind of a plastic line going to the slave. It's been replaced by a braided line yrear ago. Cheap insurance.
Good luck.
Bill----- Original Message ----- 
  From: Brian Schirano via Fot 
  To: FOT 
  Sent: Thursday, May 03, 2018 10:46 PM
  Subject: [Fot] clutch master opinion


  Hey Guys


  I need to replace my clutch master cylinder then rebuild the old one as a spare.  Quick opinion survey for GT6 clutch master cyl mfg


  TRW PNB454 $91 at BP Northwest 


  or 


  Beck/Arnley 072-1308 ~ $51 Rock Auto or Amazon


  Or?


  Thanks
  Brian





  26A GT6+, 28 TR6
  Brian Schirano
  585-305-0349 Cell 
  BSchirano at yahoo.com


------------------------------------------------------------------------------


  _______________________________________________
  fot at autox.team.net

  http://www.fot-racing.com

  Donate: http://www.team.net/donate.html
  Archive: http://www.team.net/pipermail/fot
  Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180504/f9022327/attachment-0001.htm>