[Fot] Clutches

[Jason Sukey]

I purchased mine from Richard Good.  I don't have close ratios, so it's the
standard TR6 spline.  I would guess he can get them in the other spline
count also.
Jason

On Thu, Jul 12, 2018, 12:38 PM Scott Janzen <sjanzen at me.com> wrote:

> I have not - where do I source?
>
> On Jul 12, 2018, at 12:25 PM, Jason Sukey <jsukey at gmail.com> wrote:
>
> Scott,
> Have you tried the AP racing clutch disc (stock size)? Very smooth
> engagement, claimed increase in torque capacity over stock disc.
>
> Jason
>
>
> On Thu, Jul 12, 2018, 12:13 PM Scott Janzen via Fot <fot at autox.team.net>
> wrote:
>
>> I’ve apparently reached beyond the limits of a stock pressure plate and a
>> traditional/organic material clutch disc.  I was getting unacceptable
>> clutch slip at the Kastner Cup initially on the 3-4 and then on the 2-3
>> shifts, to the point I could not apply full power.  It’s not oil, just heat
>> and power, as the clutch disc has only a few events on it.  I’ve got over
>> 180 hp at the crankshaft.
>>
>> What sources have you all found for uprated components?  I’m willing to
>> change flywheels.  Should I consider a small diameter, solid
>> center/multi-disc racing clutch?  With the close ratio gears and welded
>> diff, I need to do a fair amount of clutch slip around the paddock, and am
>> also concerned about how the on-off nature of one these might further
>> stress the differential.
>>
>> Scott Janzen
>> GT6
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/fot
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/jsukey@gmail.com
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180712/93a1e728/attachment-0001.htm>