[Fot] Clutches

[Scott Janzen]

I have not - where do I source?

On Jul 12, 2018, at 12:25 PM, Jason Sukey <jsukey at gmail.com> wrote:

Scott, 
Have you tried the AP racing clutch disc (stock size)? Very smooth engagement, claimed increase in torque capacity over stock disc.

Jason


On Thu, Jul 12, 2018, 12:13 PM Scott Janzen via Fot <fot at autox.team.net <mailto:fot at autox.team.net>> wrote:
I’ve apparently reached beyond the limits of a stock pressure plate and a traditional/organic material clutch disc.  I was getting unacceptable clutch slip at the Kastner Cup initially on the 3-4 and then on the 2-3 shifts, to the point I could not apply full power.  It’s not oil, just heat and power, as the clutch disc has only a few events on it.  I’ve got over 180 hp at the crankshaft.

What sources have you all found for uprated components?  I’m willing to change flywheels.  Should I consider a small diameter, solid center/multi-disc racing clutch?  With the close ratio gears and welded diff, I need to do a fair amount of clutch slip around the paddock, and am also concerned about how the on-off nature of one these might further stress the differential.

Scott Janzen
GT6
_______________________________________________
fot at autox.team.net <mailto:fot at autox.team.net>

http://www.fot-racing.com <http://www.fot-racing.com/>

Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
Archive: http://www.team.net/pipermail/fot <http://www.team.net/pipermail/fot>
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jsukey@gmail.com <http://autox.team.net/mailman/options/fot/jsukey@gmail.com>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20180712/3027fc90/attachment-0001.htm>