[Fot] 7/8 rear wheel cylinder

Wed Feb 24 06:37:04 MST 2016

My new Moss catalog (came in yesterday) does not show a 7/8" diameter wheel cylinder for the TR-3 or TR-4, with Girling Brakes.  The earliest wheel cylinders, starting when thy changed to Girling brakes at  VIN 13046, was .75". At TS34404, they went to a 5/8" (.625") wheel cylinder up to TS56376.  Then they went back to .75" for the rest of TR-3 production, and the first TR-4's, up to CT5782 (disc wheels).  The remainder of the TR-4's and TR-4A's used a .7" cylinder.  No mention of a 7/8" cylinder.  Am I reading this wrong?

Jack

      From: John Styduhar <johnstydo at gmail.com>
 To: TeriAnn J. Wakeman <tjwakeman at gmail.com> 
Cc: Triumph 'Friends of Triumph <fot at autox.team.net>
 Sent: Tuesday, February 23, 2016 8:02 PM
 Subject: Re: [Fot] 7/8 rear wheel cylinder

The Moss catalog shows that the 7/8" dia. rear brake cylinders were standard on most of the TR3 production.
On Tue, Feb 23, 2016 at 7:40 PM, TeriAnn J. Wakeman <tjwakeman at gmail.com> wrote:

  On 2/23/16 12:24 PM, Bill Tobin wrote:

The 7/8 dia wheel cylinders are a definite improvement over stock. 
 Highly recommended. 

 Will they work on a 3A??

 TeriAnn
 Book - The Essential Guide to Overland Travel in the United States and Canada

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo@gmail.com

_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160224/7807a321/attachment-0001.htm>