[Fot] 7/8 rear wheel cylinder

Tue Feb 23 18:08:20 MST 2016

I think with the 10" brake drums.

Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell:  319.464.4711

> On Feb 23, 2016, at 7:02 PM, John Styduhar <johnstydo at gmail.com> wrote:
> 
> The Moss catalog shows that the 7/8" dia. rear brake cylinders were standard on most of the TR3 production.
> 
>> On Tue, Feb 23, 2016 at 7:40 PM, TeriAnn J. Wakeman <tjwakeman at gmail.com> wrote:
>> 
>> 
>>> On 2/23/16 12:24 PM, Bill Tobin wrote:
>>> The 7/8 dia wheel cylinders are a definite improvement over stock. 
>>> Highly recommended. 
>> Will they work on a 3A??
>> 
>> TeriAnn
>> Book - The Essential Guide to Overland Travel in the United States and Canada
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/johnstydo@gmail.com
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/n197tr4@cs.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20160223/8108ba3d/attachment-0001.htm>