[Fot] Kastner F cam

[Jack Wheeler]

Why not use a checking clearance of .010" at the cam?  Then you can just use the specs in Kas's Competition Preparation Manual"?
It shows:
Inlet opens 39 degrees BTDCInlet closes 81 degrees ABDCExhaust opens 81 degrees BBDC
Exhaust closes 39 degrees ATDC
Jack

      From: John Styduhar via Fot <fot at autox.team.net>
 To: Dennis DeLap <yellow-green at sbcglobal.net> 
Cc: fot <fot at autox.team.net>
 Sent: Wednesday, December 21, 2016 1:47 PM
 Subject: Re: [Fot] Kastner F cam
   
How about Kas Kastner?
On Wed, Dec 21, 2016 at 9:06 AM, Dennis DeLap via Fot <fot at autox.team.net> wrote:

A M I C I
Has anyone ever figured out data for degreeing the F cam at .050 tappet rise?
______________________________ _________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate. html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/ options/fot/johnstydo at gmail. com






_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jwheeler1947@yahoo.com




   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20161221/0591d909/attachment-0001.htm>