[Fot] TR4 Spare block

[Bill Babcock]

I weld a nut on. the heat and the welded nut make things move. For more delecate operations a bit of heat, some PB blaster and let it cool, then hold a air hammer against it a few times while twisting in or out. Sometimes they move in before they’ll move out. 
> On Sep 8, 2015, at 12:43 PM, Michael Moore <mmoore at mtmcpafirm.com> wrote:
> 
> <image001.gif>
> I am having trouble removing a couple of the head studs from block, been soaking them for days with PB Blaster. Any recommendations on how to get them out. I don’t think my propane torch would generate enough heat to do any good.
>  
> Also, after cleaning spare block I found “TR 3” painted in red on side. I believe this was done by factory. Does this make my block really valuable and I can sell it and cover cost of my go-fast parts?????
>  
>  
> Thanks, Mike
>  
> 62 TR4, Race car
> 63 TR4, Street car
>  
> Mike & Becky Moore
> 6050 Ruhl Road, Fairview, PA 16415
>  
> mmoore at mtmcpafirm.com <mailto:mmoore at mtmcpafirm.com>
>  
>  
>  
> _______________________________________________
> fot at autox.team.net <mailto:fot at autox.team.net>
> 
> http://www.fot-racing.com <http://www.fot-racing.com/>
> 
> Donate: http://www.team.net/donate.html <http://www.team.net/donate.html>
> Archive: http://www.team.net/archive <http://www.team.net/archive>
> Forums: http://www.team.net/forums <http://www.team.net/forums>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/bill@ponostyle.com <http://autox.team.net/mailman/options/fot/bill@ponostyle.com>
> 
> 

Bill Babcock
Bill at ponostyle.com
Editor: Ponostyle
Celebrating Water

Editor: Xtreme Geezer
Fitness and Fun After Forty
503.936.7660
http://www.PonoStyle.com
http://www.Xgeez.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150908/7e37f3d1/attachment-0001.htm>