[Fot] Damn Headers (Again)

[Dean Tetterton]

When I built my TR3A race car in 2001 I bought a stainless steel header from Cambridge Motorsports in the UK. They have long runners with the collector right before the X box. From there is a single 2 1/4 pipe to the back. They fit with no fiddling and are still in use. In 2004 I bought another set for the Warwick. Cambridge Motorsports no longer list them and I don't know who made them. They really work well and have not burnt out. When they give up I will surely try to find another set. Wish somebody could copy them.

Dean T
On Jul 18, 2015, at 5:09 PM, Jim Gray wrote:

> Mike,
> I bought the stahl header jig for the TR4 and Richard already owned the TR6 jig they had.
> I completely stripped the Stahl jig as there was nothing about it I liked.
> I can’t get back to making any headers until fall.
> jim g
>  
> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Mike Deweerd
> Sent: Saturday, July 18, 2015 2:57 PM
> To: Dan Forgey
> Cc: Triumph List; triumph fot
> Subject: Re: [Fot] Damn Headers (Again)
>  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20150718/efb4f75e/attachment-0001.htm>