[Fot] GT6 valve guides

[Vangoughv]

I use bronze in my race prepped GT6 with no issues in 5 race seasons.

Vince

> On Dec 22, 2015, at 11:58 AM, Jason Ostrowski <jason at multivintage.com> wrote:
> 
> Sorry if this comes through twice!
> Hello Brian,
> Bronze Guides for sure.
> You may here debate on this from others using steel guides I suppose.
> Bronze has a property that is condusive to lack of friction in regular sliding up and down.
> Beyond that; they have worked well for long periods of time (many, many years) in the GT6 heads of all the GT6 race cars that I have seen go very fast.
> I have had very good results in all analysis of bronze guides that have seen very high rpm's.
> Jason Ostrowski
> Friendly Ghost Racing
> 1969 Triumph GT6 racecars
> 
>> On Mon, Dec 21, 2015 at 8:29 AM, Brian Dennis <britracer89 at yahoo.com> wrote:
>> Happy Holidays.
>> 
>> I am working on a new head for my GT6 racer. I remember a while back a discussion about valve guides. I did do some looking around in the archives but was unable to find the string. My question: 
>> 
>> Stainless or Bronze guides for race car? Why? or Pros/cons?
>> Thanks, 
>> Brian
>> Foster, RI
>> 
>> _______________________________________________
>> fot at autox.team.net
>> 
>> http://www.fot-racing.com
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/jason@multivintage.com
>> 
>> 
>> 
> 
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/vangoughv@hotmail.com
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20151222/6bc76d2d/attachment-0001.htm>